What is a Frequency Converter?
A frequency converter, also known as a power frequency changer, is a device that takes incoming power, normally 50 or 60 Hz and converts it to 400 Hz output power.
Different types of power frequency converters exist, specifically, there are both rotary frequency converters and solid state frequency converters. Rotary frequency converters use electrical energy to drive a motor. Solid-state frequency converters take the incoming alternating current (AC) and convert it to direct current (DC).
What is the Purpose of a Power Frequency Converter for Commercial Utility?
Standard commercial utility power is alternating current (AC) power. AC refers to the number of cycles per second (‘hertz” or Hz) that the power fluctuates, positive and negative, around a neutral datum. Two standards exist in the world, 50 hertz and 60 hertz. 50 Hz is prevalent in Europe, Asia, and Africa, while 60 Hz is the standard in most of North America and some other countries (Brazil, Saudi Arabia, South Korea) around the world.
There is no inherent advantage to one frequency over another frequency. But there can be significant disadvantages. Frequency conversion problems occur when the load being powered is sensitive to the input power frequency. For example, motors spin at a multiple of the power frequency. Thus, a 60 Hz motor will spin at 1800 or 3600 RPM. However, when 50 Hz power is applied, the RPM is 1500 or 3000 RPM. Machines tend to be speed-sensitive, so the power to run them must correspond to the design RPM intended. Thus, a typical piece of European machinery needs 50 Hz input, and if it runs in the United States, a 60-to-50 Hz converter is required to convert the available 60 Hz power to 50 Hz. The same applies vice versa to convert 50 Hz power to 60 Hz. While standard power ratings and capacities exist for frequency conversion, our frequency converters operate over a range of voltages from 100V to 600V. The most commonly specified voltages are 110V, 120V, 200V, 220V, 230V, 240V, 380V, 400V, and 480V. Because our standard and custom design capabilities can meet a range of power system needs, Georator is your supplier for frequency to voltage converters.
Do I Really Need a Frequency Converter?
When potential clients are faced with buying a frequency converter, ours or those of our competitors, they often find the cost to be a major impediment. Do they really need the frequency converter? Well, the answer lies in what type of load is being served.
Applications involving motor loads often need a power frequency converter because the rotational characteristics, specifically revolutions per minute (RPM), are a direct function of the input frequency of the electricity. A 60 Hz motor will spin at some multiple of 60, e.g., 1800 RPM. Concurrently, a 50 Hz motor will spin at a multiple of 50, e.g. 1500 RPM. Thus, when dealing with a motor load, especially in a multi-motor machine, it may be quite necessary to use a frequency converter to ensure that the motors spin in accordance to the original rotational design.
However, resistive loads, such a resistance heaters and some lights, don’t care what the frequency of the incoming power is. So if the load is restive, no frequency conversion may be necessary. The only caveat is that the voltage must be in the right range. Even if only a major portion of the load is resistive, it may be more economical to split the load into parts, and only feed the frequency-dependent component with a converter.
It’s also wise to consider replacing motor(s) in the load to the proper frequency, as this may yield a less costly solution than using a frequency converter.
Georator application engineers are available to discuss these issues with you; contact our team for assistance. While we value your business, we don’t want to sell you something you don’t need.